Export

You can export images along with your models. In that case Avastar stores the images as files on your disk and adds a reference to the Collada file. The SL Importer knows how to read and import these images for static meshes.
Note: For rigged meshes the images are not recognized by the SL Importer. This is a viewer bug which has never been fixed.

• Image Format: (default is png) is typically predefined in the Render settings. However we found it convenient to offer an immediate setting in the Exporter. By default the exporter applies the image type only to generated images.
• Use ‘Image format’ for all images: If you set this option, then Blender will use the selected image format for all exported images. If you disable the option, then only the generated images are affected.

• Use RGBA: Blender can export the Alpha channel for images. Normally you set this in the render settings where you can specify to use either RGB or RGBA for image exports. If the selected export format supports Alpha then enabling RGBA here will export images with Alpha channel even if the render settings are set to RGB and vice versa.

The Advanced Options are related to special scenarios. You should normally keep all options set as they are. This makes sure that your exports are well suited for SL. However in some situations you will have to get back here and set the options according to the descriptions below.

Warning: You must really know what you do when you set an advanced option. Handle with care!

Use Bind Pose: The Use Bind Pose option is largely documented in the Bind Pose Workflow
You normally set this option in the Avastar Shape Editor. We added it here only for convenience.

Animesh Restpose: You use this option when you want to export cor Animesh. Note this option only resets the Shape Editor to White Stickman for Export. You may actually want to work in White Stickman Shape all the time, so this option is here just for convenience.

 

Apply Armature Scale: If you have scaled your Armature in Object Mode for making a tiny or a giant you should not apply the scale to the armature because then the entire Avastar Animation system may no longer work. But the Object Scale must be applied when you export the mesh.

Otherwise the target online world does not recognize the scaling and the giant shrinks back (or the tiny grows back) to normal size. The apply Armature Scale option ensures that the Object scale is applied in the exported Armature.

Apply Rotation & Scale: If you have Scaled or rotated your Objects in Object Mode then this Scale&Rotation should be applied to all objects of an export to avoid unexpected scaling and rotation issues within the target system. However this is all so often simply forgotten and sometimes even unknown.

Hence we have added an automatic apply Rotation&Scale to the exporter. This setting does not affect the original objects.

Export SL Rotation: When you export an Avastar Rig then it must be rotated according to the SL Standards (so that the character looks into the positive X direction).

Hint: You want to enable this option when you export to Second Life or similar worlds.

Disabled: Do nothing
Enabled: Rotate the Rig by 90 degrees to make it compatible to the SL specifications

Triangulate: Export the meshes as triangles. Normally you want to do the triangulation on your own if at all. You also can just export without triangulation and let the SL Importer do the job. Or just use this option here.

This is an optional setting. We set it to True because it seems to be the safest option of all possible ones.

Weld Edge Normals: When two separate objects share a boundary line, then you typically see a boundary seam in the object texture. This happens because the vertex normals differ even if the adjacent objects share the same vertex locations.

The exporter recalculates the vertex Normals at the adjacent boundaries of the selected objects.

Weld to all visible: Sometimes you want to only export one part but still want the vertex Normals be fixed.

This option lets the exporter take all visible objects into account when calculating the vertex Normals at object boundaries.

Export Shape: The current Shape from the Shape editor is exported as an avatar shape file (with extention .xml) Some viewers (firestorm) can import this file as new Avatar Shape by some

This option is most important especially for Developerkit makers. If you distribute this shape along with the developerkit file, then Avastar can setup the Developerkit Manager with more precision.

Sanity Checks: Perform tests on the Mesh (tricount, texture face counts, etc…)

Hint: You want to enable this option in most cases.

 

Define which subset of the Bones in the rig are exported along with the meshes.

Export with Joints: When you have edited the Armature to adjust the Rig to your special character (Alien, creature, pet…) then you normally want to keep your edited Armature when you export your Meshes.

Hint: You want this option disabled only when your rig is so complex that Avastar can not calculate the Neutral Rig for your situation. In that case please set the sliders to SL Neutral (Avastar Shape Editor, white stickman icon) and never touch the sliders again (actually the sliders will be locked when you select the neutral shape)

Disabled: Export the Rig visually as it is. Note: You must make sure that the Avastar Shape Editor is reset to the SL Neutral Shape (White Stickman Icon). Otherwise Avastar rejects the exports.

Enabled: Calculate the neutral skeleton from the current rig settings (temporary set Sliders to Neutral SL Settings) but apply the current Slider settings as bind pose. Pleased refer to the Bind Pose document for further explanations.

Export all Bones: Add all bones of the rig to the exported Model.

You want to enable this option only when you plan to export your model for import into another 3D Modelling tool.

Only Weighted Bones: Avastar can export all deform bones of the Rig. However in most cases it is enough to only export the deform Bones which are actually used (weighted to meshes)

Hint: You want to enable this option in most cases.

Disabled: Export all deform Bones unconditionally
Enabled: Export only those bones which are actually used (have weights for meshes)

Only Deform Bones: Avastar has many control bones (mainly for IK-Animation, targetless Animation and attachment points) Avastar can export all Bones of the rig, or only the Deform bones

Hint: You want to enable this option in most cases.

Disabled: Export all Bones in the Rig unconditionally
Enabled: Export only deform Bones

Allow Weighted Attachments: SL does not allow weighting of attachment points. Hence we suppress the export of weights for attachment points by default.

This option should indeed never be used for SL! Handle with Care. It is very likely that the SL importer rejects meshes with attachment point weighting at some time in the future.

Enforce Parent Hierarchy: Ensures that all parent bones of exported bones are also exported, even if they have no weights defined.

Details: When you enable the above bone filters then it can happen that not all bones of a Bone chain are exported. This becomes a problem when one or more of the not exported bones have Joint edits defined. Those definitions would then get lost during export.

Hint: You want to enable this option in most cases.

Disabled: Do nothing
Enabled: Take care that all parent bones of exported Bones are also exported.

The Collada options are mainly for exporting the models with the most possible extra information. This data can ater be used by other 3D programs or target engines for rebuilding as much of the original Avastar rig as possible. Those options are rarely used.

Export Bone Roll: Export Bone Roll using the Blender Collada Scheme.

Hint: This is only useful when you want to later import back the Dae file to Blender.

Disabled: Do nothing
Enabled: Export the Bone roll according to Blender’s Collada Scheme

Export Bone layers: Export Bone Layer Data using the Blender Collada Scheme.

Hint: This is only useful when you want to later import back the Dae file to Blender.

Disabled: Do nothing
Enabled: Export the Bone Layer data according to Blender’s Collada Scheme

Export with Blender Profile: Use Blender Collada scheme for exporting Blender specific Information

Hint: This is only useful when you want to later import back the Dae file to Blender.

Disabled: Do nothing
Enabled: Export Extended Options according to Blender’s Collada Scheme

Avastar also provides some advanced export options. However those options are not shown by default as they are only rarely used.

Note: If you really want to use these options, then you first need to enable them in the Avastar Addon Properties Panel.

You enable these options in the Avastar Add-on Panel (where you initially enabled the Add-on after you installed it):

Limit Weight Count: In SL the number of weights per vertex is strictly limited to 4. We believe this number is enough for all weighting tasks. In cases where you think this limit is too low, we always found the real problem was due to bad mesh topology and bad rigging.

Setting this number affects the maximum number of weights which are exported by Avastar. We strongly recommend to keep this number set to 4.

If you create small objects with disconnected sub-meshes, then you often get errors labelled as MAV_BLOCK Error when you try to upload your mesh to Second Life.

The image aside gives a nice example of a single object that is made of many smaller disconnected submeshes. While there is nothing wrong with this mesh, the SL Importer often has trouble to import the mesh.

Special characters in Object names

Most dangerous characters are: & < ! > # $ ‘ “

Resolution:

Remove special characters in Object names and then export again

Special characters in File names

Most dangerous characters are: & < ! > # $ ( * ) [ ] { } ‘ “

Resolution:

Remove special characters in file names (renaming the .dae file should be enough)

Extremely dense Meshes

Please check if your mesh contains areas with very small triangles (edge length smaller than about 1 millimeter)

Resolution:

Try to avoid high resolution meshes. You are doing better when you put high density into textures and normal maps (Normal maps are now supported by Second Life)

Orphaned edges and vertices

If your mesh contains edges which do not belong to any face or disconnected vertices.

Resolution:

Remove these edges and vertices.
Hint: in Edit mode Select -> Non Manifold to find candidates. You may want to disable the “boundary” option in the operator panel.

Duplicate Vertices

If your mesh contains duplicate vertices this can cause issues. However sometimes duplicate verts are on purpose (for example when you use the split edge modifier in Blender 2.73 or older) so you need to test if this issue is caused by split edge or by accidental duplicates.

Resolution:

Remove the duplicate vertices.
Hint: in Edit mode ‘W’ -> Remove Doubles to delete the duplicates.